Fusion Hemp Oil Wood Finish, Fusion™ Mineral Paint.
A fantastic deep penetrating finishing product that will protect your wood inside to out. A completely natural product that provides a rich lustred food-safe finish
Easy to apply by simply pouring or brushing on and wipe away the excess with a clean rag.
- Food Safe
- No Chemicals
- No additives or preservatives
- NO added VOC’s
- Biodegradable
- 100% Natural Hemp seeds
Environmentally friendly with no additives or preservatives, this oil is great for those that suffer from chemical sensitivities and can not use solvent-based products. The odour of this oil is much like crushed walnuts.
This is different than the oil in the health food stores only in so far as we have put the oil through a process which allows the oil to completely dry on its own, without the use of added chemicals or dryers.
This oil will darken and richen the wood with a soft lustre. Generally the older the wood the more it will darken it. This will vary based on the type of wood and the age of the wood. It is highly recommended to try a small amount on an area to find out how your project will look with this application.
Used inside this food-safe oil finish is perfect to use in the kitchen on wooden cutting boards, wooden utensils or stone. Also provides a wonderful finish for flooring.
It penetrates to protect from the inside out. This oil does not leave a surface film that will chip or scratch.
The oil will feel dry to the touch one day after the initial application, however complete drying can be several days. For example, if there is too much oil initially applied, then small amounts of oil may rise over the first few days. This can be avoided by wiping the excess away with a cloth. If used on a floor during this time it is recommended to place some cardboard pieces where there will be a lot of foot traffic. Dirty shoes should be kept off for at least two weeks.
Coverage:
500 ml – Covers approximately 80 square feet
Coverage will vary depending on the wood being treated. For example, a previously oiled surface will require very little oil, whereas bare wood will require more. Some woods are far more absorbent than others, so usage may vary project to project.
Quality Control:
Each batch goes through rigorous quality control ensuring that the paint will not separate or harden in the container for 7 years. We are able to achieve this by using only the best available ingredients on the market. Our formulation is 100% uniquely ours, formulated from the ground up. You will not be able to find a duplicate on the market that compares!
Fusion™ colours are non-toxic, lead-free, virtually odourless and have zero added volatile organic compounds (VOC), contain no ammonia or formaldehyde.
Fusion™ Colour Accuracy Disclaimer:
Whilst we’ve taken every effort to craft the colours you see on screen to accurately reflect the colours in the Fusion™ Mineral Paint collection. Due to differences in screen settings, we cannot guarantee an exact colour match.